HOW TO APPLY RICHIES PVC FIX BOND
Step 1: Measure and cut the PVC edge banding as per the requirement.
Step 2: Apply the contact glue to PVC edge banding and the material with a brush or spray contact cement . Avoid overdoing it.
Step 3: Let the contact glue dry to touch. Then, bond the material and PVC edge banding.
Step 4: Remove the excess PVC edgebanding using a utility knife, router or edgebanding trimmer.
Step 5: You can use the acetone to remove the excess contact cement. Make sure it is not harming the semi-gloss finish. Otherwise, it may put a whitish layer on the PVC, making you replace the whole edge.
